Cost: $$
Time: 5 hours
Skill: 2 of 5 — Easy

DIY Lounge Chair Plan with Storage

Lay back and soak up the sun, or the shade

The DIY lounge chair plan is designed for all-day comfort, giving you a dedicated place to unwind after work or spend a slow weekend outdoors. With a deep seat sized for a 26″ cushion and an adjustable backrest with multiple reclining positions, it brings a relaxed, customizable feel to patios, decks and backyard spaces.

A built-in storage area and optional side tray detail support everyday use, keeping essentials close without cluttering your space. This patio lounge chair DIY plan moves through clear stages, from the frame and storage to the seat cladding and adjustable backrest, ending with an optional slide out side tray. The result is a sturdy wood lounge chair made for long-lasting outdoor use and everyday relaxation.

Note: Lounge cushion not included.

Before you get started, please read our info on safety, fasteners and building tips, and please consult our Terms of Use.

Get The Plan

What you’ll need to build a wooden lounge chair

Materials

(2) 2 x 4 x 10′ YellaWood® brand pressure treated pine lumber
(3) 2 x 2 x 10′ YellaWood® brand pressure treated pine
(16) 1 x 4 x 10′ YellaWood® brand pressure treated pine boards
1/2 lb. box of 1 1/4″ wood screws + appropriate bit
1/2 lb. box of 1 5/8″ wood screws + appropriate bit
1/2 lb. box of 2″ wood screws + appropriate bit
1/2 lb. box of 2 1/2″ wood screws + appropriate bit
(1) 30″ x 1 1/2″ continuous hinge
(2) 1/4″ x 4″ galvanized carriage bolts and nuts
(4) 1/4″ galvanized washers
Preferred wood finish
Waterproof wood glue (optional)
YellaWood Protector® stain and sealer

Side tray materials

(3) 1 x 4 x 10′ YellaWood® brand pressure treated pine
(1) 2 x 2 x 8′ YellaWood® brand pressure treated pine
½ lb. box of 1 ¼” wood screws + appropriate bit
½ lb. box of 3″ wood screws + appropriate bit

Tools

Pencil
Measuring tape
Miter saw (or chop saw)
Table saw
Drill/driver
Jig saw
Carpenter square
Combination countersink bit (with 3″ long 1/8″ bit)
1/4″ drill bit
Clamps (two at least 5′ long)
Adjustable wrench
Radial sander (or sanding block)
Damp cloth (optional)

Step-by-step instructions for a DIY lounge chair

That Sunday afternoon nap feels even more refreshing when you’ve put in the work and are proud of your craft. Whether you park it poolside, on the patio or in the shade, this outdoor lounge chair belongs in your backyard.